Automatic Clamp Type Pouch Dispenser Machine-ZJ-TBJ180

It adopts clamp type bag feeding with synchronized belt .

The servo drive control of the cutting and bag feeding helps to achieve the precise control then the high speed cutting.

It suitable for back sealing and 3 sides sealing pouch, which is of powder and granule,liquid,sauce desiccant etc.

It is easier to maintain and operation, and more advanced and flexible, offering greater accuracy.


Technical Parameters

Product Tags

It is applicable to the automatic dispenser small pouches in food, daily necessities, chemical industry, medicine, health care products and other industries to reduce pollution and improve production efficiency. Always to work with pouch layer, and used in various industries for automated packaging solutions.

(Technical parameters)

Product Application

Back sealing and three sides sealing bags of powder , liquid , sauce , desiccant ,etc

Pouch Size

55mm≤W≤80mm     L≤100mm   H≤10mm

Dispensing speed

Max:180 bags/min(bag length = 80mm)

Detection Mode

 Thickness test or ultrasonic

Power

900w ,single phase AC220V ,50HZ

Compressed air

0.4-0.6Mpa

Machine Dimensions

(L)820mm x(W)800mm x(H)1800mm

Features:

  1. Servo drive control of the cutting and bag feeding to achieve the precise control then to achieve the high speed cutting.
  2. Bag feeding by means of clamp type with synchronized belt.
  3. Allow the auto counting online and setting the number of continuous cutting. To adjust the cutting position ,cutting force and the dispensing position.
  4. Adopting the thickness testing and ultrasonic sensor to measure the bag length to meet the various packing and change the product easily.
  5. PLC controller and friendly interface to make operation simply.
  6. Advanced fault feedback to make the maintenance easily.

Features

1. Servo drive control of the cutting and bag feeding to achieve the precise control then to achieve the high speed cutting.
2. Bag feeding by means of clamp type with synchronized belt.
3. Allow the auto counting online and setting the number of continuous cutting. To adjust the cutting position, cutting force and the dispensing position.
4. Adopting the thickness testing and ultrasonic sensor to measure the bag length to meet the various packing and change the product easily.
5. PLC controller and friendly interface to make operation simply.
6. Advanced fault feedback to make the maintenance easily.


  • Previous:
  • Next:

  • Write your message here and send it to us